HTO gear flow divider with cast iron houssings with intergrated valve

AVAILABLE FROM 2 TO 12 SECTIONS

The HTO series includes integrated inlet and outlet blocks as well as higher working pressures up to 320 bar/4,600 psi.

Furthermore, the HTO's inner components have been optimized in a way that there are only two sizes necessary to cover the 4 sizes required in the MTO series.

The HTO series is only available with end position compensation. The pressure-relief and suction valves are integrated into the housing.

MTO gear flow divider with aluminum housing

AVAILABLE FROM 2 TO 12 SECTIONS

All inlet ports have an internal connection and every second chamber has an inlet port.

We offer two different executions: A – is executed with an into the housing integrated combined pressure relief and suction valve. The G - version is without this valve.

HAGC & AWC

 

The hydraulic capsules are special large diameter and small stroke hydraulic cylinders, capable of realizing large forces often used in the large loads necessary to produce the rolling load. An advantage of our hydraulic capsules is given by the possibility of calculating the friction of the seals as the contrast force varies.

To do this, we have developed special software to be used inside bespoke testing cages.

Rotating joints and Cylinders

 

Rotary joints or swivel joints are used to transfer fluids from a static part of the machine to the rotating shaft or in the opposite direction.
We can produce oil, water, grease, emulsion and air rotary joints.
Depending on the numerous applications, different solutions are applied to the engineering.

Double Acting Cylinders

Cylinders with a double pressure chamber, designed and tailored to the customer's specifications following the required regulations and according to the highest quality standards.
Double acting cylinders are available in any size up to 2'500mm bore and 20'000mm length.

Single Acting Cylinders

The single acting cylinders have only one pressure chamber and the force is developed in one direction only. The rod is repositioned by an external force.

Dimension up to 2500mm diameter bore and any length. We test single acting cylinder in special bespoke cages.

FKS2 Series

FKS2 Series

  • According to International Standard ISO 6022 -DIN 24 333 - CETOP RP 73H.
  • 8 kinds of mounting type: MF3- MF4 - MP3 - MP4 - MP5 - MP6 - MT4 - MS2.
  • Nominal pressure: 250bar.
  • Working medium hydraulic oil, mineral oil, water oil, water glycol emulsion, water oil emulsion.
  • Working temperature: -20°c ~ +120°c.
  • Bore: 40mm ~ 200mm.
  • Piston rod: 20mm ~ 140mm.

FKS1 Series

 

FKS1 Series

  • According to International Standard ISO 6022 -DIN 24 333 - CETOP RP 73H.
  • 6 kinds of mounting type: MF3- MF4 - MP3 - MP5 - MT4 - MS2.
  • Nominal pressure: 250bar.
  • Working medium hydraulic oil, mineral oil, water oil, water glycol emulsion, water oil emulsion.
  • Working temperature: -20°c ~ +120°c.
  • Bore: 40mm ~ 200mm.
  • Piston rod: 20mm ~ 140mm.