Fluid Power Technology & Solutions
Fluid Power Technology & Solutions
Single-stage submersible pumps made of high-resitant materials for the application in aggressive liquids up to temperatures of 130 °C. The pumpes are manufactured with an intermediate bearing up to a dip depth of 2500 mm. For pressure- and vacuum tanks,…
Read MoreSingle-stage, horizontal centrifugal pumps in compact construction. 3 type sets made of highly resistant materials permit the use in many fields of chemical as well as process engineering. Please contact us for layout and selection.
Read MoreCOAXIAL AND ANGULAR PLANETARY GEAR REDUCERS 26 sizes up to 1,200,000 Nm / 885,000 lbs-ft / 10,620,000 lbs-in available. The gearbox output shafts are available in splined, splined hollow, keyed versions or for usage with shrink disc. Available accessories…
Read MoreThe HMs series is available in 4 sizes with 8 different displacements from 18 to 147 cm³/rev / 1 in³ to 9 in³/rev. The motor shafts are available in splined hollow or key versions. Also available are hydraulic vented disk…
Read MoreThe HMF series is available in 7 sizes with 55 different displacements from 39 cm³ to 4,300 cm³/rev / 2.38in³ to 262 in³/rev. The nominal pressure is usually at 250 bar / 3,600 psi and the peak pressure up to…
Read MoreAVAILABLE FROM 2 TO 12 VALVE SECTIONS The B29 valve block is used for filling, bleeding and reset functions. Block and divider are separately tubed. The B29 valve block can be retrofitted. More information about the layout, application and setup…
Read MoreAVAILABLE FROM 2 TO 12 SECTIONS IN 7 SIZES Volume per section from 79 cm³ to 85,000 cm³ / 4.8 in³ to 5,187 in³. The regular working pressure is 250 bar / 3,600 psi. Higher pressure rates up to 450…
Read MoreAVAILABLE FROM 3 TO 8 SECTIONS IN 8 SIZES. THE MLH HAS A SHORTER CONSTRUCTION THAN THE MZB. Volume per section from 12,5 cm³ to 12,312 cm³ / 0.76 in³ to 751 in³. Linear-stroke volumetric dividers are usually supplied as…
Read MoreAVAILABLE FROM 2 TO 12 SECTIONS The HTO series includes integrated inlet and outlet blocks as well as higher working pressures up to 320 bar/4,600 psi. Furthermore, the HTO’s inner components have been optimized in a way that there are…
Read More